Turn on vent fans and leave them on if there is moisture in the room; invest in extra fans if you suspect concerns caused by high humidity levels.
New homes have naturally higher humidity levels since the components used to construct the house are still curing; but the wood products used to expel moisture into the environment make it difficult to maintain the ideal, 35 percent, humidity level… However, by your upcoming year, humidity levels will be much easier to control, and by the fourth or third year, most of the window condensation or high humidity levels will be gone. Usually a current house expels 500 to 600 water gallons during the first year and a half, then you will need to regularly run your humidifier, turning the humidity too low prior, up to about a month in advance. Turn your humidifier back up once it warms up! Ensure your house is satisfactorily ventilated, especially the bathrooms and kitchens where boiling water use is rampant. Turn on vent fans and leave them on if there is moisture in the room; invest in extra fans if you suspect concerns caused by high humidity levels. Run your air conditioner system, which will cool your house and detach humidity and moisture. Ensure to get a cooling plan that is appropriately sized for the square footage of the house, then weather-stripping around your windows and doors also goes a long way to ensure excess humidity does not seep inside you as it creates a narrow seal that prevents hot or cool air from escaping. They are essential for hotter climates where it is humid outdoors. Nevertheless, you should consult a real heating plus A/C specialist for more ways to keep your indoor section comfortable and free from excess humidity.