An AC compressor failure might be acquaintanced with any of the following important causes… First off, clogged suction lines can cause overheating in the AC refrigerant.
This would reduce the cooling efficiency! Electrical complications usually carefully linked with the accumulation of acids could be easily damaging to the compressor and other necessary parts of the AC.
Inadequate oil lubricants could lead to a lot of physical friction between the movable parts in the compressor. This would lead to extra tear and wear, causing leakages in the compressor. The familiar oil pump levels are more than essential in solving such complications. Another cause of failure is the presence of unwanted impurities in the system. This may be as a result of the housing position, which is usually located outside. Such locations introduce many contaminants. In addition, too much or the absolute wrong refrigerant could be problematic. It is thus proposed that you visit an expert with qualifications. Infamiliar suction lines could be another cause of failure. A well fitting refrigerant line is essential. The line should neither be too small or too large as it could quickly cause a premature failure. According to research, dirty coils are the major cause of complete compressor failure. This could be a result of the build-up of dust or minerals in the AC condenser coil. This implies that less heat would be expelled and that more energy would rapidly be channeled to try and cool the system. The last possible cause may be a refrigerant charge. Holes or cracks could cause this.